exceptions | Closer to Code

Note: If you're using old Errbit version (0.2.0, 0.4.0) and an old Airbrake version (v4) please refer to this manual to make it work with self-signed certificates.

Having an error catcher like Errbit behind SSL is generally a good idea. Especially when Errbit is hosted on a different server than you application (for example when you manage multiple apps with one Errbit instance). In many cases you will have a self-signed certificate (why would you pay for a cert for internal tool). If you try to use it with Airbrake, you will see following error:

Airbrake:
  HTTP error: SSL_connect returned=1 errno=0 state=unknown state: certificate verify failed

Unfortunately, global SSL certificates verification disabling hack (solution that used to work with Airbrake notifier v4) won't work:

# No longer working!
OpenSSL::SSL::VERIFY_PEER = OpenSSL::SSL::VERIFY_NONE

Luckily, Airbrake notifier is written pretty well, so hacking it (and disabling per request SSL certificate verification) is not hard at all. Here's a full code you need to place in config/initializers/errbit.rb to make it work:

module Patches
  module Airbrake
    module SyncSender
      def build_https(uri)
        super.tap do |req|
          req.verify_mode = OpenSSL::SSL::VERIFY_NONE
        end
      end
    end
  end
end

Airbrake::SyncSender.prepend(::Patches::Airbrake::SyncSender)

After that (and configuring Airbrake notifier), you can test it out like this:

Airbrake.notify :test

If your exceptions aren't exceptions but expectations, you're doing it wrong. Here's an example what programmers tend to do:

def validate_status(user)
  case user.status
    when 'active' then return user
    when 'inactive' then fail InactiveUserError
    when 'invalid' then fail InvalidUserError
    when 'deleted' then fail DeletedUserError
    else
      fail UnknownUserStatusError
  end
end

begin
  validate_status(user)
rescue InactiveUserError
  # do something
rescue InvalidUserError
  # do something else
rescue DeletedUserError
  # do something else 2
rescue UnknownUserStatusError
  # do something else 3
end

I've seen also few cases, when exceptions parameters were used to pass objects that the programmer was later on working with!

As you can see, the whole flow of this piece of code is handled with exceptions. In this post I will focus on a performance reason why it is bad, (but if you're interested in how to refactor code like this, at the end of this post you will find some external links about that. That's why I've prepared a simple benchmark

require 'benchmark'

elements = [0, 1]
big_ar = (1..10000).to_a

TIMES = 100000

Benchmark.bmbm do |x|
  x.report('break') do
    TIMES.times do
      elements.each do |i|
        break
      end
    end
  end

  x.report('catch throw') do
    TIMES.times do
      catch(:benchmarking) do
        elements.each do |i|
          throw(:benchmarking)
        end
      end
    end
  end

  x.report('catch throw heavy') do
    TIMES.times do
      catch(:benchmarking) do
        elements.each do |i|
          throw(:benchmarking, big_ar)
        end
      end
    end
  end

  x.report('fail') do
    TIMES.times do
      begin
       elements.each do |i|
         fail StandardError
       end
      rescue
      end
    end
  end

  x.report('fail heavy') do
    TIMES.times do
      begin
       elements.each do |i|
         fail StandardError, big_ar, {}
       end
      rescue
      end
    end
  end

  x.report('raise') do
    TIMES.times do
      begin
       elements.each do |i|
         raise StandardError
       end
      rescue
      end
    end
  end

  x.report('raise heavy') do
    TIMES.times do
      begin
       elements.each do |i|
         raise StandardError, big_ar, {}
       end
      rescue
      end
    end
  end
end

ruby benchmark.rb

                        user     system      total        real
break               0.040000   0.000000   0.040000 (  0.040243)
catch throw         0.080000   0.000000   0.080000 (  0.082100)
catch throw heavy   0.080000   0.000000   0.080000 (  0.082422)
fail                0.300000   0.000000   0.300000 (  0.298863)
fail heavy          0.470000   0.000000   0.470000 (  0.476829)
raise               0.300000   0.000000   0.300000 (  0.305635)
raise heavy         0.480000   0.000000   0.480000 (  0.475377)

And this is how it looks on a chart:

Based on this benchmark we can see following things:

Catch/throw performance is not influenced by the size of passed attribute - it doesn't matter if we pass a huge structure or a simple object
Performance of fail and raise is almost equal, for both normal and heavy case
Fail/raise can be up to 12 times slower than break
Fail/raise can be up to 6 times slower than catch/throw

So, from the performance point of view, handling flow with exceptions can be much more expensive than in other ways. Exceptions are heavy because they are exceptions. They aren't suppose to happen all the time, that's why the implementers of compilers nor the designers of the language focus on their performance.

Refactoring

If you've noticed code like this in your apps, here are some great blog posts on how to fix that:

Tag: exceptions

Errbit + HTTPS: Setting up Errbit reporter (Airbrake v5 gem) to work with self-signed HTTPS certificate

Exceptions should not be expected – stop using them for control flow (or any other logic handling) in Ruby

Refactoring